|
|
KETRON®
PEEK 30% CF (CM)
| Property |
Method |
Unit |
Value |
| Mechanical |
| Specific
Gravity, 73°F |
D792 |
|
1.42 |
| Tensile
Strength, 73°F |
D638 |
psi |
18,000 |
| Tensile
Modulus of Elasticity, 73°F |
D638 |
psi |
800,000 |
| Elongation,
73°F |
D638 |
% |
2.0 |
| Flexural
Strength, 73°F |
D790 |
psi |
30,000 |
| Flexural
Modulus, 73°F |
D790 |
psi |
1,300,000 |
| Compressive
Strength, 10% Def., 73°F |
D695 |
psi |
25,000 |
| Compressive
Modulus of Elasticity, 73°F |
D695 |
psi |
550,000 |
| Hardness,
Rockwell, Scale as noted, 73°F |
D785 |
|
M97
(R125) |
| Hardness,
Durometer, Shore D scale, 73°F |
D2240 |
|
D86 |
| Izod
Impact (notched), 73°F |
D256
Type A |
ft-lb/in |
1.4 |
| Coefficient
of Friction (Dry vs Steel) Dynamic |
PTM55007 |
|
0.24 |
| Limiting
PV, 73°F |
PTM55007 |
psi-fpm |
41,000 |
| k
(wear) factor |
PTM55010 |
|
160 |
| Thermal |
| Coefficient
of linear Thermal Expansion |
E-831(TMA) |
in/in/°F |
1.70x10ˆ-5 |
| Deflection
Temperature 264 psi |
D648 |
°F |
450 |
| Melting
Point (crystalline) peak |
D3418 |
°F |
644 |
| Continuous
Service Temperature in Air (Max.) |
|
°F |
480 |
| Thermal
Conductivity |
|
BTU-in/(hr-ft²°F) |
6.37 |
| Electrical |
| Surface
Resistivity |
EOS/ESD
S11.11 |
Ohm/square |
>10ˆ5 |
| Chemical |
| Acids,
Weak, 73°F/23°C, acetic acid, dilute hydrochloric or sulfuric |
Acceptable
Service |
| Acids,
Strong, 73°F/23°C, conc. hydrochloric or sulfuric |
Limited
Service |
| Alkalies,
Weak, 73°F/23°C, dilute ammonia or sodium hydroxide |
Acceptable
Service |
| Alkalies,
Strong, 73°F/23°C, conc. ammonia or sodium hydroxide |
Acceptable
Service |
| Hydrocarbons-Aromatic,
73°F/23°C, benzene, toluene |
Acceptable
Service |
| Hydrocarbons-Aliphatic,
73°F/23°C, gasoline, hexane, grease |
Acceptable
Service |
| Ketones,
Esters, 73°F/23°C, acetone, methyl ethyl ketone |
Acceptable
Service |
| Ethers,
73°F/23°C, diethyl ether, tetrahydrofuran |
Acceptable
Service |
| Chlorinated
Solvents, 73°F/23°C, methylene chloride, chloroform |
Acceptable
Service |
| Alcohols,
73°F/23°C, methanol, ethanol, anti-freeze |
Acceptable
Service |
| Inorganic
Salt Solutions, 73°F/23°C, sodium chloride, potassium cyanate |
Acceptable
Service |
| Continuous
Sunlight, 73°F/23°C |
Acceptable
Service |
| Miscellaneous |
| Water
Absorption Immersion, 24 hr |
D570 |
% |
0.15 |
| Water
Absorption Immersion, Sat. |
D570 |
% |
0.50 |
| Outgassing
TML (Total Mass Loss) |
E595 |
% |
0.30 |
| CVCM
(Collected Volatile Condensable Material) |
E595 |
% |
0.00 |
| WVR
(Water Vapor Regained) |
E595 |
% |
0.00 |
| Compliance |
| UL94 |
|
|
V-0 |
|
| |
Plastic Sheets, Rods, Tubing:
Fasteners:
Metal Sheets, Rods, Tubes
Gears
Felt
Sheets, Discs, Strips, Cords
Tapes-
Skived, Adhesive Backed
Exhaust,
Duct, Air, Vacuum Hose
|
